NEWS: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 21: | Line 21: | ||
A bug in the frequency computation was making the frequency reading erratic and highly noisy. It has been now solved and a reading difference example is shown below. | A bug in the frequency computation was making the frequency reading erratic and highly noisy. It has been now solved and a reading difference example is shown below. | ||
[[File: F02HjW4XgAIAnRg.jpeg]] | [[File: F02HjW4XgAIAnRg.jpeg | 450px]] | ||
To install the new firmware follow this guide below. | To install the new firmware follow this guide below. | ||
Latest revision as of 15:05, 11 November 2023
11th November 2023
Raspberrypi 5 is confirmed compatible with the RPICT series hat.
9th October 2023 - New product
This is a standalone programmer for Arduino. You can use this to program an arduino without the need of a computer. It uses a SD card to store the sketch to upload.
12th July 2023 - Bug fix for frequency reading
We recommend all our users reading frequency to upgrade to the latest firmware v4.2.0.
Affected cards are RPICT7V1 RPICT8 RPICT4V3 RPICT4W3T1 version 5.
A bug in the frequency computation was making the frequency reading erratic and highly noisy. It has been now solved and a reading difference example is shown below.
To install the new firmware follow this guide below.
Upload Arduino sketch from Raspberrypi to RPICT
Then execute these commands
wget lechacal.com/RPICT/sketch/RPICT_MCP3208_v4.2.0.ino.hex lcl-upload-sketch.sh RPICT_MCP3208_v4.2.0.ino.hex