Albawinder

Alba Winder - The Arduino Coil Winder

The AlbaWinder is a project developed to create a coil winder controlled by Arduino. It uses OpenBeam frame and components.

Technical Specifications

OpenBeam Frame and components
Dimensions: 40x32x12cm.
2x Nema17 stepper motor.
Rubber cones to adapt a wide range of coils.
2 axis - 1 Carrier axis - 1 Spooling axis.
2 Proximity sensors for detection of the carrier.
Maximum Coil size: Length 25cm Diameter 9cm.


16x2 LCD Display.
1 USB port.
Atmega328 MCU (arduino programmed).
6 push button.
1 potentiometer for speed control.
1 Power switch.

12V operated. Requires 2.1mm Jack center positive.