Standalone Arduino Programmer

From lechacal
Revision as of 21:07, 13 September 2023 by Administrator (talk | contribs)
Jump to navigation Jump to search


Overview

The standalone Arduino Programmer can programme many atmel chip in stand alone mode which means it does not need a computer to operate. This is very useful for automating the programming of large number of chips.

Features

  • Onboard Micro SD card.
  • 3 operation LED (work / ok / error).
  • 3 operation button.
  • 6 pin SPI connection to target.
  • Additional GPIO pins available for expansion.
  • Provision for use of a small LCD screen.

Basic Usage

Preparing the programmer

  • Compile the target sketch on Arduino IDE.
  • Locate the produced hex file.
  • Copy it to the SD card.
  • Rename the file as 'firmware'hex'.
  • Insert the SD card in the programmer.

Production Usage

  • Connect the 6 pin ribbon cable to the target device.
  • Press the OK button.
  • Sucessful flash will be indicated with the green led 'ok'
Retrieved from ‘http://lechacal.com//wiki/index.php?title=Standalone_Arduino_Programmer&oldid=7155’