Emonwrt3 Network Configuration

PAGE UNDER CONSTRUCTION.

Default

By default the unit serves an access point with SSID set as Emonwrt3.

The IP address is 192.168.2.1 the hostname is OpenWrt.

Any device connected to the Emonwrt3 (wifi or wired) will be assigned an IP address with DHCP.

Connect to wifi AP

This is to connect the Emonwrt3 to an existing wifi office/home network.

From the web interface go to Network | Wifi | Scan. The list of neighbouring network will be displayed. Select your network and following the step presented on the page.

This action will create a new network interface for the wifi. The wired ethernet will still be present with static IP address.

Connect to wired DHCP network

Make sure the device can be accesses via wifi first.

Set unit as auto ip address.

Mesh

Coming soon.