RPI DCV8

From lechacal

Revision as of 16:27, 5 November 2019 by Administrator (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

RPI_DCV8 is a 8 channels acquisition board for Raspberrypi. Any of AC current & voltage or DC current & voltage can be setup at assembly/purchase time on each channel.

8 Channels (both AC or DC).
Measure RMS or Average signal.
Fit on Raspberrypi 4 holes mounting pattern.
Atmega328p Mcu (Arduino UNO)
MCP3208 ADC (12bits)
Screw Terminal connectors.

Retrieved from ‘http://lechacal.com//wiki/index.php?title=RPI_DCV8&oldid=4290’