MCP3208 Tester

From lechacal

Revision as of 11:45, 1 May 2020 by Administrator (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

This is a MCP3208 tester board. It comes with a SOP16 socket.

All pins are available to pick with jumper wires using two 8 pins socket header.

A 6 pins SPI port is available for direct connection with other systems. We recommend our NanoProg to connect an arduino Nano to the tester.

On teh analog input side

Retrieved from ‘http://lechacal.com//wiki/index.php?title=MCP3208_Tester&oldid=4587’