Upload Arduino sketch from Raspberrypi to RPICT

From lechacal
Revision as of 15:40, 21 April 2021 by Administrator (talk | contribs) (Created page with " This article will guide you to upload an Arduino sketch form teh raspberrypi directly to the RPICT units. ==Prerequisite== This only works with RPICT units having an atmega...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

This article will guide you to upload an Arduino sketch form teh raspberrypi directly to the RPICT units.

Prerequisite

This only works with RPICT units having an atmega328p chip and with autoreset support.

Suitable units are any RPICT version 5.

This won't work with any RPICT unit version 3 and RPICT3V1/RPICT3T1.

The atmega328p chip must have bootloader enabled. If not then the bootloader should be burned with the NanoProg_v1 NanoProg first.

Retrieved from ‘http://lechacal.com//wiki/index.php?title=Upload_Arduino_sketch_from_Raspberrypi_to_RPICT&oldid=5621’