RPICT Full Output Firmware

From lechacal

Revision as of 20:30, 17 March 2023 by Administrator (talk | contribs) (→‎Usage)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Installation

We assume here the Raspberrypi has been prepared with the guide below.

Howto_setup_Raspbian_for_serial_read

We also assume the packages to flash the Arduino have been setup.

Upload_Arduino_sketch_from_Raspberrypi_to_RPICT

Get the firmware:

wget lechacal.com/RPICT/sketch/RPICT_FULL_OUTPUT_001_v4.1.0.ino.hex

Flash it with:

lcl-upload-sketch.sh RPICT_FULL_OUTPUT_001_v4.1.0.ino.hex

Usage

When using the lcl-run command produces the following output.

lcl-run

Retrieved from ‘http://lechacal.com//wiki/index.php?title=RPICT_Full_Output_Firmware&oldid=6985’