Recording RPICT Serial stream on local file: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
Line 12: | Line 12: | ||
nano gateway.conf | nano gateway.conf | ||
In this file you should turn off Emoncms and Influxdb. | In this file you should turn off Emoncms and Influxdb. Then turn on localsave. Also edit the directory if needed. | ||
[system] | [system] |
Revision as of 12:54, 11 February 2019
We are proposing a basic script template which can be installed as below.
wget lechacal.com/RPICT/tools/lcl-gateway.py.zip unzip lcl-gateway.py.zip wget lechacal.com/RPICT/tools/gateway.conf sudo apt-get install python-requests
Edit the gateway.conf file to reflect your own setting.
nano gateway.conf
In this file you should turn off Emoncms and Influxdb. Then turn on localsave. Also edit the directory if needed.
[system] port=/dev/ttyAMA0 baud=38400 [emoncms] enabled = False hostname = emoncms.org apikey = --apikey-from-emoncms-goes-here-- node = 20 [influxdb] enabled = False url = http://10.10.15.26:8086/write # https://corlysis.com:8086/write dbname = mydb user = token passwd = -optional-password-goes-here---- measurement = rpict3t1 # Modify this to match your board [localsave] enabled = True directory = /tmp/
Insert the RPICT and run
./lcl-gateway.py
The data will be stored in the /tmp directory. One file per day in csv format. Titled with the epoch time when it started.