100mm (4") Ducting offset pipe connector
3D printed pipe connector made to measure.
The offset pipe connects two duct pipes presenting an alignment offset. This allows clean piping layout and efficient air flow on rigid pipe work. It also greatly improves space compare to other offset correction means.
- Ducting size: 100mm 4" (other size available on request)
- Material: Nylon PA12
- Colour: depends on stock. Usually grey. Enquire within for available specific colour.
- Build time: Allow 48 hours for manufacturing before dispatch.
- Gender: Male-Male
First measure the across distance as explained further below. Then pick the range it falls into in the options for the correct price. Then send us a message with the required offset in millimeters. We accept offsets from 0 to 85mm.
Product dimensions
Product dimensions depends on the offset chosen.
- Width(mm): 104 + offset
- Depth(mm): 104
- height(mm): 60 + 1.732 * offset
Offset
The offset is the distance across of the two pipes the connector is joining. This can be measure simply by joining both pipes together and use a tape measure to directly get the offset. You will have to provide this distance to us.
Inline interval
The inline interval is the space between the two end of pipe to connect. Its length depends on the offset and is given as below.
inline interval = 4 + 1.732 * offset