Revision as of 12:36, 19 March 2021

THIS A PAGE FOR A PRODUCT UNDER ACTIVE DEVELOPMENT. SOME INFORMATION ARE STILL MISSING.

Overview

RPICT4W3T1 is the equivalent board to the RPICT4V3 with ZMPT voltage transformer integrated and the addition of a DS18B20 temperature sensor port.

Using the manufacture firmware the data output is:

NodeID Vrms1 Vrms2 Vrms3 Vrms4 Realpower1 Realpower2 Realpower3 Realpower4 Irms1 Irms2 Irms3 Irms4 PF1 PF2 PF3 PF4 Temperature

Real Powers are computed using the following rules:

RealPower1 -> CT1 & V1
RealPower2 -> CT2 & V2
RealPower3 -> CT3 & V3
RealPower4 -> CT4 & V3

These rules can be modified in the configuration if needed.

Other output type can be streamed out. This should be configured in the unit.

All outputs type available are

@@ Line 10: / Line 10: @@
 [[File:IMG_0628_small.png | 450px]]
+=Overview=
+* 4 AC current sensors.
+* 3 AC Voltage sensors.
+* 1 Temperature port
+* Compute real power.
+* Fit on Raspberrypi 4 holes mounting pattern.
+* AtMega328 Mcu (Arduino UNO)
+* MCP3208 12 bits ADC
+* Stackable with RPICT8_slave and RPI_T8.
+* Onboard voltage transformer
+RPICT4W3T1 is the equivalent board to the RPICT4V3 with ZMPT voltage transformer integrated and the addition of a DS18B20 temperature sensor port.